Veggies for Carnivores: “Dad Approved” Vegan Chili

veganchilimoneyshot

I’ve never written about my cooking on this blog before, partially because my cooking methods aren’t very proper, and also because I didn’t think it was craft related, but I’m starting to think that’s bogus. I cook, and love to cook, a lot, and in almost every single way being a good cook is exactly like being a good crafter. You have to understand your materials and how to use them, think of the best ways to combine them to get your desired results, use “patterns” as guidelines if needed, and always keep your intended audience in mind. Sure, your materials may be corn and beans instead of fiber and cloth, but ultimately it’s the same process. Take some stuff, put it together, get some different – hopefully better – stuff. 

With cooking, however, your audience looms larger in the decisions you make. Most crafters don’t work on commission but for themselves, so when you’re suddenly tasked to creating a meal and must not only satisfy yourself but also your family, you’ve got a tough nugget to crack. Unless you’re serving actual nuggets, who doesn’t like nuggets?

Case in point – I worry about my own health a lot but I worry even more about the health of my loved ones like my Partner and my Dad. When you’ve got hard-core carnivorous or carbolicious men on your hands, it can be hard to get them to eat something veggiful. As a result I spend a lot of time coming up with veggie or vegan recipes that taste like heavy, fatty comfort food but that actually have not a single unhealthy thing in them. I used to try to find recipes for this, but over time found most vegan recipes wanted their healthy food to also taste like healthy food. Laaaame. That’s when I stopped using recipies entirely, and learned the best food comes from just figuring stuff out on your own.

To that end I want to share with you all how I make my luxuriously delicious vegan chili, which can be altered to be not-so-vegan if you want to up the ante a little. If you’re looking for a classic step-by-step recipe, tough. I don’t do that. Like I said – I think the best cooking in the world is like crafting and requires a lot of adjustment, feeling, and figuring things on the fly. If you want to be a really good cook and come up with your own recipes, you gotta be willing to go off the rails. The being said, I’ll do my best to explain how I make it in a way that you should be able to follow and alter to your own liking. Maybe you’re like me and you prefer this sort of cooking to a rigid recipe. If so, hurrah! You’re in the right place.

Continue reading “Veggies for Carnivores: “Dad Approved” Vegan Chili”

Advertisements

DIY: Custom Variegated Embroidery Thread Using Liquid Dye

IMG-2260

In my last post I talked about how helpful making friendship bracelets has been for re-igniting my creativity after a block. I often find making simple, more “crafty” things that give me great joy easily lead into other concepts that expand my creative arsenal. In this instance the bracelets gave me a great opportunity to explore how the DMC variegated line could work up. I have very quickly become obsessed with working in these threads as they allows you to cheat easily create spontaneous texture and color shifts in your work. I’m not thrilled, however, at the limited range of colors in the DMC line and the one-tone-per-skein approach to variegation. Note: DMC does have a line of multi-color variegated thread as well, but unless your work calls for those specific hues you’re going to find that line limited as well. 

As a result I’ve spent the last few weeks exploring how DMC Cotton thread can be dyed and manipulated to create custom variegated blends with supercalifragilisticexpialidocious solid results. Today I want to share what products I use to make these blends, how I go about doing it, and what you can do to get different effects in the process.

Read on if you’re interested in making your own custom thread colors!

Continue reading “DIY: Custom Variegated Embroidery Thread Using Liquid Dye”

My Etsy Site has Launched!!

Hi all!

I wanted to share with you all that I have launched my Etsy site! You can find it here.

Right now I only have a few things up there, including some complex wall pieces and jewelry. If you like my blog or my work take a look! I hope to add more embroidery pieces as well as some other fiber art stuff to the page, so check back often.

I’ll have a new DIY post later on how to make quick and dirty drawstring bags with stuff you probably have around the house already that are good for packaging jewelry or for storage around the house, so keep an eye out for that later.

Find your joy and pink today guys, and thanks for your support as always!

 

Awkward Introductions

Well I’ve put this off long enough. I think it might be time to officially say hello to you all.

You may have noticed that this blog is more or less anonymous. This is intentional – I’ve never been comfortable attaching my name or face to anything, particularly anything online. I also struggle with anxiety, which can sometimes make conversation, conflict, and controversy very difficult – things that are very hard to avoid online. I keep my opinions to myself and keep my nose out of things, thank you very much. I don’t even use Facebook anymore, have never really figured out how Twitter works, and keep an Instagram almost entirely just to share stupid shit I see on the streets of Brooklyn and, as you’ll soon see, my hair, which is magnificent. No shame it really is. 

That being said – being anonymous has its problems too. Sure no-one can doxx you, but no-one is aware of you either, Your achievements and work float away into the ether without an owner, and any excitement that usually comes with success stays stuck in the confines of your screen. Im proud of what I make, but being anonymous always makes it seem less real or important and can even make me feel kind of ashamed of myself, which is stupid since making arm tables and cross-stitches is far from shameful.

It’s actually a real drag. 

And so, with immense fear and almost immediate regret, it’s time to introduce myself.

After the cut.

Continue reading “Awkward Introductions”

Building My Custom Embroidery Frame

Howdy folks!

Missed posting any Halloween stuff this year again, whoops. Funnily enough it’s probably my favorite holiday and time of year, which is I think why I never post anything.

I’m happy and busy for once in my life and I don’t need the internet for a few days. What a trip.

But alas my favorite month has passed and I settle now into cozy winter-time preparation. A big part of what I want to work on this winter is to finish up all the random cross-stitch projects I started but never completed. You can find a master post that includes a lot of these herebut I have even more unfinished things than that.

They say don’t start what you can’t finish. I say don’t start what you can’t hide in a drawer for 2 years and break out later in a fit of guilt.

The first big thing I wanted to finish was the Epic Pokemon Pattern Gen I. I sort of began to loathe lose respect for Pokemon after the whole Pokemon Go idiocy phenomena and so let this pattern simmer away for awhile, but the first generation of these little nuggets was a huge part of my childhood and the pattern is really fun to stitch up.

The problem, as anyone who has attempted this project can tell you, is that it is really big and has a butt-load of colors. As a result, I could never really get in the groove with it and hated working on it. A lot of this kind of work fatigue can be solved with organization and a really good frame. A good large-scale stitching set up should allow you to have everything at your fingertips and should put no stress on your neck, back, and shoulders.

I wanted to make a “My Neck, My Back” joke there so bad but this is a nice blog for nice people so I didn’t. 

I’ve tried loads of frames and, as in my previous post about thread holders, found none of them really did the job right. I have a lot of back problems and found none of them allowed me to work more than an hour or two without severe pain. When I saw this video by the incredibly strong and talented Dana Batho of Peacock & Fig  I knew immediately it was the solution to my problems. Because of a back injury sustained while in the Canadian Armed Service she requires a very comfortable set up with all her resources either on or directly near her frame. With loads of wood and parts left over from all the other frames I have, I figured I could Macgyver something like her frame that would work for me!

Raw Supplies.JPG

As you can see I started with a variety of lengths of wood, many luckily with perfect pre-drilled holes, and an absolutely beautiful scroll frame you can get on Amazon here. I had the help of my wonderful and wood-talented boyfriend as well who cut two dowels to use for cross supports and also drilled additional holes. For the record I CAN use power tools despite all evidence to the contrary, but I’m not super comfortable using them outside a shop. Obviously the Boy gives no shits in that regard, so I make him do it. What a good boog.

Together we designed the piece to allow for a variety of positions and easy disassembly since we live in a very small apartment with limited storage. The entire frame is assembled using nuts, bolts, and drill holes; the only part that was drilled in permanently were the round dowels into the uprights.

Marking.JPGDrilling.JPGIMG_2776.JPG

We made cross-bar legs for the front and back, with the front being about half the length of the back. This allows the frame to have a nice angle when resting on your thighs in a reclined position. So far it’s worked great on the couch, the bed, or our velvet chair. Plus, you can hang all your scissors and tools off the frame just like Dana from Peacock & Fig. I’m a happy nugget indeed.

Finished Frame.JPG

Excuse the bad lighting – by the time I stretched it all perfect and adjusted all the angles it was after sunfall. 

There you have it – a custom frame in one day! This wasn’t technically the cheapest project – the frame itself cost about $40 and it used parts from two other expensive stands I didn’t like – but you could easily make one of these to fit your frame for under $10 worth of hardware supplies. With a commercial lap frame this size running anywhere from $50 – $150 dollars I’m still pretty happy with the result. By moving which holes the legs are attached to I can easily change the angle of my stitching depending on how I’d like to sit – it can even work very well as a table stand in my kitchen.

And that’s it! I can draw up a detailed diagram of our design if it’s helpful, but it’s really self-explanatory. Sit with your frame and determine how you’d like it to angle towards you, then you can make your frame fit your body flawlessly and stitch the night away.

I’m not really the one to post all sorts of silly updates, especially on a project loads of people have done already, but I will post the finished product when this is done. Stay tuned for more DIY organization and tips and other updates on my artwork. I also did make an awesome costume this year, but I’m going to post that as part of a different launch that will happen sometime in the near future. Stay tuned for that, and remember –

Keep Conquering! 

DIY: Thread Organizer Card

OMG HI! I’m making a blog post whhaaattt?

Yep. I haven’t posted for over a year. Never got around to posting about how Operation: Apartment worked out and now we’re probably going to change everything again. Never posted the finished versions of loads of projects, in fact never finished most of those projects.

What the heck happened?

Let’s just say that the transition from college student to full-on-adult is a lot harder then anyone ever gets around to telling you when you are young. I might make a post about that in the future if anyone wants to hear it, but who really cares about that shit.

Let’s talk money wasters.

Continue reading “DIY: Thread Organizer Card”

DIY: Custom Privacy Screen

DIY Custom Privacy Screen

Hey all!

Living in Brooklyn it can be near impossible very difficult to get some privacy. Case in point – while our apartment has a lovely outdoor space both the stairwell and grassy area are shared with our landlord’s family, meaning people are constantly walking back and forth when I am hanging out on my deck. I love my neighbors, but sometimes you just need a little alone time, ya dig?

I thought a privacy screen would work perfect for this, but I didn’t want to buy a nice asian screen at the flea only to have it destroyed by weather. The solution? Make our own with some hearty pine and lacquer it against the weather. The best part? These beautiful plain wood boards are just begging to be painted with whatever your heart desires. Read on to see how the boy and I made the screen, and how I’ve begun to customize it!

Continue reading “DIY: Custom Privacy Screen”

Quick Tip: Using Dye-Na-Flow to Color Canvas Shoes

Dyeing canvas shoes with no bath or mess!

Hello all!

It’s bright and sunny here in New York today – after almost a week straight of rain and mud – so I decided a fresh day needed a bright and colorful shoe! I’ve been looking for an easy way to dye my white Vans for awhile since they got disgusting and dirty pretty much as soon as I put them on my feet. White shoes in NYC? Not so much.

I also managed to get pale red dye spots on them after dyeing some old jackets, and those weren’t going to scrub off no matter what, so I decided to go with a hot pink to cover up all the stains. While originally I was going to dip dye the shoes like I do most things, I found a new (to me) product by Jacquard called Dye-Na-Flow that works AMAZING for this application! Read on to see how I used Dye-Na-Flow and what my tips are for dying canvas shoes with the product.

Continue reading “Quick Tip: Using Dye-Na-Flow to Color Canvas Shoes”

My Work – Ongoing Embroidery

Stitches - Concraftidor

Hello all!

We’ve been crazy busy with the end of the semester at my job lately, keeping me from my writing and my art. Now that the summer is coming and things are winding down at the Institute I work at however, I’ve had more time to pick up my embroidery and other projects. Since work on my apartment is also reaching a brief stopping point I thought this would be a great time to share some of my work with you all.

Embroidery is particularly important for me not only as a creative outlet, but also as a calming mechanism; I struggle with Generalized Anxiety Disorder and use my creativity to get out all my worries and focus on something soothing and beautiful. Repetition and organization is really helpful for GAD, so cross-stitch does the trick beautifully. As a result, I usually have about 4 or 5 projects going at once so I always have something inspiring to work on. At the moment I only have one finished piece in my home since I give a lot of work away, but I have pictures of my WIP as well. Read past the jump for photos and commentary on my work!

Continue reading “My Work – Ongoing Embroidery”